T10; AT10 for widths of 25, 32 and 50 mm H for widths of 25.4, 38.1 and 50.8 mm

Further profiles, intermediate widths and widths exceeding 50 mm are available on request.

The ZS / ZSi timing belt joint The timing belt joint ZS / ZSi is designed to allow repeated detaching and joining of timing belts in the plant itself.

Versions are available for the AT10, T10 and H profiles.

Both versions are offered in stainless-steel as standard for the AT10 and H profiles. For the T10 profile, the tooth side inserts are made of brass

The PINJOIN timing belt joint The PINJOIN timing belt joint is designed for permanently joining belts, one time only, in the plant. Version available for profile AT10.

The connection is made by means of stainless-steel threaded pins that fit into laterally drilled holes running longitudinally through the tooth.

Advantages

• Connections made of stainless steel are suitable for use in the food and pharmaceutical industries
• Quick and easy installation on site, in the plant
• Coated belts can also be joined using PinJoin

Properties

• Despite the open finger-spliced joint, these belts offer approx. 50% of the performance of endlessly welded timing belts